Problem Possible Cause Remedy
Cutting height is too low. Raise the cutting height.
Loud noises, the mower is rattling.
Screws on engine, its fixing or on
the mower chasing are losse.
Have screws tightened by an au-
thorised specialist dealer or the
FLYMO Service.
Mower runs unevenly or vibrates
strongly.
Blade is damaged or the blade
mounting is released.
Have blade tightened or replaced
by an authorised specialist dealer
or the FLYMO Service.
Blade is very dirty. Clean the mower (see Mainte-
nance). If this does not rectify the
problem, contact the FLYMO Serv-
ice.
The adjust knob is locked.
The bumper is dirty. Clean the bumper.
Poor grass collection.
Lid is not correct in place. Put the lid correct on the grass
box.
Airflow slots are dirty. Clean the mower (see Mainte-
nance).
Lawn is not cleanly cut.
Blade is blunt or damaged. Have blade replaced by the FLY-
MO Service.
Cutting height is too low. Raise the cutting height.
Repairs
For other malfunctions speak to the FLYMO
servicing department. Repairs must only be done by
FLYMO servicing departments or specialist dealers
approved by FLYMO .
Technical data
Electric Lawnmower
Unit Value (Art. 9670907-01 / 9670908-01)
Rated Power: W 1700
Mains voltage: V 230
Mains frequency: Hz 50
Speed of rotation cutting blade: R/min. 4200
Cutting width: cm 33
Cutting height adjustment (4 positions): mm 12 - 32
Volume of grass box: l 22
Weight: kg 10.5
14 17 - 001 -
To Next Page
Loading...
Need help?
General
