3. OPERATION
WARNING! Risk of physical injury!
Cut injury when the blade turns or the product starts
accidentally.
v Wait for the blade to stop, disconnect the product from
the mains and use gloves before you connect or transport
the product.
To connect the mower:
-
WARNING! Risk of electric shock!
To avoid damage to the mains cable, the mains cable
must be inserted into the cable lock
-
.
v Before you operate insert the mains cable into the cable
lock
-
.
1. Loop the mains cable, insert the loop into the cable lock
-
and
pull tight.
2. Connect the mains cable into a 230 V mains socket.
To start the mower:
6
WARNING! Risk of physical injury!
Risk of injury if the product does not stop when you
release the start lever.
v Do not bypass the safety devices or switches.
For example do not attach the start lever
5
to the handle.
To start:
The product is fitted with a two-handed safety device
(start lever
5
with safety interlock
6
) to prevent the
product from being turned on by accident.
There are two start levers
5
fitted. Either one have to be used to
start.
1. Connect the mains cable into a 230 V mains socket.
2. Push the safety interlock
6
with one hand and pull the
start lever
5
with the other hand.
3. Release the safety interlock
6
.
The product will start.
To stop:
v Release the start lever
5
.
To adjust the cutting height:
7
The cutting height can be adjusted from 12 to 32 mm in 4 positions.
1. Turn the adjust knob
7
counterclockwise to lower the cutting
height.
2. Turn the adjust knob
7
clockwise to increase the cutting height.
6
To Next Page
Loading...
