6. TROUBLESHOOTING
WARNING! Risk of physical injury!
Cut injury when the blade turns or the product starts
accidentally.
v Wait for the blade to stop, disconnect the product from
the mains and use gloves before you do troubleshooting.
To clean the bumper:
9
0
7
q
4
9
Clean the bumper when the adjust knob
7
locks.
1. Remove the 2 R-clips
9
of the handle locks on both sides.
2. Turn the adjust knob
7
to level 1.
3. Tilt the lower handle
0
forward.
4. Remove the bumper
q
of the mower body
4
.
5. Clean the bumper
q
.
6. Assemble the bumper (see Assembly).
To replace the blade:
WARNING! Risk of physical injury!
Cut injury when the blade turns and it is damaged,
bent, out of balance or has chipped edges.
v Do not use the product when the blade is damaged, bent,
out of balance or has chipped edges.
v Do not regrind the blade.
The FLYMO spare parts are available from your FLYMO dealer or
from the FLYMO service.
Only use an original FLYMO blade:
– FLYMO replacement blade reference no. FLY070.
Part no. 5898064-90.
v Let the blade replace by the FLYMO Service or a specialist dealer
authorised by FLYMO.
10