Caring
• It is very important that you keep your product
clean. Grass clippings left in any of the air
intakes or under the hood could become a
potential fire hazard.
Cleaning (S)
• USE GLOVES
1. Remove grass from under the hood with a piece of
wood or similar.
2. Using a soft brush - remove grass clippings from
all air intakes, the roller, grassbox and grassbox
lid.
3. Remove the cutting head, see Figure H, to gain
access to the fan and clean with a soft brush.
4. Wipe over the surface of your product with a dry
cloth.
• IMPORTANT
Never use water for cleaning your product. Do not
clean with chemicals, including petrol, or solvents
- some can destroy critical plastic parts.
Storing your product
1. Your mains cable can be stored as illustrated in
figure T.
Your product can be stored in a hanging position.
• The back of the switch handle has a hanging
slot for storing the product on the wall.
1. Push the lower handle in on both sides (figure U)
and the handle will drop down.
2. Hang the product from a hook or suitable screw as
illustrated in figure V.
At the End of the Season
1. Replace plastic cutters, bolts, nuts or screws, if
necessary.
2. Clean your product thoroughly.
3. Ask your local Service Centre to clean the air filter
thoroughly and carry out any service or repairs
required.
S
T
V
U
7
To Next Page
Loading...
Need help?
General
