10
Cable Restraint
M
1. Form loop in mains cable and push
the loop through the slot as illus-
tr at ed in fi gure M.
N
2. To secur e, posit ion loop over the
hook and pull the cable back through
the slot as illustrated in fi gure N.
Starting and Stopping
WARNING: Swit ch off the product
and disconnect from the mains electri ci t y
supply before opening the inlet cover or
attempting to insta ll or rem ove the
blow er tube or vacuum tubes. The mot or
must be stopped and the impell er
blades no longer turni ng to avoid serious
injury from the rotating blades.
WARNING: You MUST make sure
the tubes are secure before using the
pr oduct.
WARNING: Do not use the
blower uni t wit hout the tubes or debr i s
bag properl y attached to avoi d flyi ng de-
bri s and/or impeller contact which can
cause serious injur y. Always wear eye
prot ecti on to prevent rocks or debri s
fr om being blown or ricocheting into the
eyes and face which can result in bl ind-
ness or serious injury .
Stopping your unit
Slide the
ON/OFF switch to the OFF
position.
Starting your unit
Slide the
ON/OFF switch to the ON
position.
To Next Page
Loading...
