5100450-03
Husqvarna AB
561 82
Huskvarna
Sweden
Service Recommendations
1. We strongly recommend that your product is serviced at
least every twelve months, more often in a professional
application.
2. Always use genuine Husqvarna Spare Parts.
3. Prepacked spares are available from most Husqvarna
UK Ltd. stockists.
4. Your product is uniquely identified by a silver and black
product rating label
5. If you have a problem with your machine contact your
local Approved Service Centre ensuring you have full
details of your product as described on the product
rating label.
6. Should it be necessary for work to be carried out by
your Service Centre, it is important to take your
complete machine including cable and any extension
cables used.
A network of specialist dealers can be found in your local
Yellow Pages. To obtain service on your product simply
telephone or visit your local Service Centre. Should you
require service under the terms of our guarantee the
Service Centre will require proof of purchase.
All of the centres listed stock genuine Husqvarna Spare
Parts.
NOTE: Our Service Repairers act on their own behalf and
are not empowered to commit or legally bind Husqvarna
UK Ltd. in any manner whatsoever.
EC DECLARATION OF CONFORMITY
Husqvarna AB, 561 82, Huskvarna, Sweden
Declare under our sole responsibility that the product(s);
Category............................Battery HedgeTrimmer
Type(s) ............................HTC24A
Identification of Series.......See Product Rating Label
Year of Construction..........See Product Rating Label
Conforms to the essential requirements & provisions of the following EC Directives:
2006/42/EC, 2004/108/EC, 2000/14/EC
based on the following EU harmonized standards applied:
EN50144-1, EN50144-2-15, EN50366, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3
The maximum A weighted sound pressure level L
pA
at the workstation, measured according to EN60745-2-15,
corresponds to the Level given in the table.
The maximum hand / arm vibration weighted value measured according to EN60745-2-15 on a sample of the above
product(s) corresponds to the Value
a
h
given in the table.
The declared vibration total value has been measured in accordance with a standard test method and may be used for
comparing one tool with another.
The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning:
The vibration emission during actual use of the power tool can differ from the declared total value depending on the
ways in which the tool is used.
Operators should identify safety measures to protect themselves that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched
off and when it is running idle in addition to the trigger time).
2000/14/EC: The Measured Sound Power L
WA
& Guaranteed Sound Power L
WA
values are according to the tabulated
figures.
Conformity Assessment Procedure............... Annex VI
Notified Body................................................. Intertek, Cleeve Road
Leatherhead, Surrey
KT22 7SB, England
Ulm 25/08/2011
P. Lameli
Global R & D Director - Hand held
Keeper of Technical documentation
Type
Blade Length (cm)
Measured Sound Power
L
WA
(dB(A))
Guaranteed Sound Power
L
WA
(dB(A))
Level
L
pA
(dB(A))
Uncertainty
K
pA
(dB(A))
Value
a
h
(m/s
2
)
Uncertainty
K
ah
(m/s
2
)
Weight (Kg)
HTC24A
42
88
90
79.8
2.5
1.17
1.5
6.94
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
Copyright © 2011 Flymo S.A. All rights reserved. Flymo® and other product and feature names are registered or unregistered trademarks
of Flymo S.A.
To Previous Page
Loading...
