E-mail:info@flyrontech.com
Flyron Technology Co., Ltd. 20 Channel MP3 Sound Board
Stop playing inter-cut advertisement
7E FF 06 15 00 00 00 FE E6 EF
7E FF 06 16 00 00 00 FE E5 EF
During playback of the module, there are two modes to stop. One is to stop playing the inter-cut advertisement, and go back and
continue to play the music interrupted and the other mode is to stop all playback (stop decoding). For example, suppose the
module is playing an inter-cut advertisement and now if send a stop command 0x16, it will stop all playback tasks.
4.5.9 Specify repeat playback of a folder
Specify repeat playback of the folder “02”
7E FF 06 17 00 00 02 FE E2 E F
Specify re pea t playback of the folder “01”
7E FF 06 17 00 00 01 FE E3 E F
The folder names must be 01- 99, and no more than 99. After sending the command, it repeatedly plays the tracks in the specific
folder and it will not stop until it receives a command to stop.
4.5.10 Set random playback
Random playback of the whole s to rage de vice 7E FF 06 18 00 00 00 FE E3 EF
This command is used to randomly play all of the tracks in the storage device according to physical sequence and no matter if
there is a folder or not in the device.
4.5.11 Set repeat playback of current track
Turn on single repeat playback
7E FF 06 19 00 00 00 FE E2 EF
Turn off single repeat playback
7E FF 06 19 00 00 01 FE E1 EF
During playback, send the turn-on command, and it will repeatedly play the current track. If the module is at Pause or Stop status,
it will not respond to this command. If you need to turn off repeat playback, just send the turn-off command.
4.5.13 Combination playback (playback of a group)
1) We added this function to meet some users‟ special need that when users need to send only one frame data to play
multiple tracks one by one without pause. It supports maximum 15 tracks together for combination playback. All of the
sound files used for combination playback need to be put in folders (folder 01 -folder 99).
2) If MCU sends a frame data as 7E FF 15 21 01 0201 0301 0401 0501 0602 0103 0504 0705 09 EF, see the
analysis as below.
Command: 0x21
Number of bytes : 0x15=21 bytes - -- FF 15 2 1 01 0201 0301 0401 0501 0602 0103 0504 0705
09(two parameters for one track, i.e. the folder number and the track number)
The module will play track 002 in folder 01, track 003 in folder 01, track 004 in folder 01, track 005 in
folder 01, track 006 in folder 01, track 001 in folder 02, track 005 in folder 03, track 007 in folder 04 ,
and track 009 in folder 05 .
To Next Page
Loading...