EasyManua.ls Logo

FLYSURFER VMG2 - Packing up; Packing up - Wingtip on Wingtip

FLYSURFER VMG2
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
14
PACKING UP
10 PACKING UP
A FLYSURFER kite can be packed into its bag very quickly. It is
important that the bridle is securely packed inside the kite.
10.01 Packing up - wingtip on wingtip
Open the deflate valve.
Wind the lines round the bar until you get to the mixer. Secu-
re the lines with the elastics or a half hitch. Disconnect the flying
lines of the control bar from the kite.
Fold the kite in half along the middle (tip on tip) and make
sure that the bridle lines are on the inside. Also make sure that
there are no bridle lines folded over the topsail.
Throw the bridle lines in between the folded kite.
Grab the kite.
Lay the tips on top of each other, and then the bar on top and
roll up the kite. Be careful with the bridle lines and stow them
as best you can within the two halves of the kite when rolling it
up. You can open the deflate valves to make rolling it up easier.

Related product manuals