ENGLISH
15
PACKING UP
Secure the collected ends of the bridle lines with a lark head
knot. Place the bridle lines on the bottom sail of the respective
wing side and stow the ends with the mixer in one of the air in-
takes. Make sure that no bridle lines are on the outside.
Roll up the kite starting with one wingtip. Put some weight
on the already folded wingtip and roll the second side to the
middle. Make sure that no sharp objects on the beach damage
the cloth.
Warning: Do not fold the kite!
Stow the kite in the corresponding VMG bag.
Make sure that no sharp objects on the beach damage the
cloth. Roll the kite with the wing halves on top of each other
from end to middle.
Warning: Do not fold the kite!
Stow the kite in the corresponding VMG bag.
10.02 Packing up both tips individually
Open the deflate valve.
Wind the flying lines onto the bar and secure them with the
bungies or even better using a half hitch. Disconnect the control
bar from the bridle lines.