Flytec 5020 - Page 12

Flytec 5020 technical manual
Automatic volume control: The basic setting levels 25%, 50%, and 75% will be slowly
increased automatically once the airspeed exceeds 40 km/h (25 mph). It is impossible for the
volume to exceed 100%.
The following settings can be made in the menu under ‘Basic Settings /Vario tone’.
Audio thresh.
Threshold To avoid the climb acoustic starting on the ground or during very slow
climbs in flight, the starting point can be set from 0.2m/s to 0.4m/s.
Asc. F
Beep frequency The basic frequency will be heard when the vario is at 0m/s, except
when it is suppressed at the starting point.
Mod.
Modulation (see graphic below)
Pit.
Pitch, broken tone interval (see graphic below). The broken tone intervals increase in pitch
with height
- 12 -