Repairs can be made to the Micro B-25 Mitchell by using the following items:
● Thick Foam Safe CA (for parts adhesion), GPMR6072
● Foam safe CA accelerator, GPMR6035
● Formula 560 canopy glue, PAAR3300
● Two sets of needle nose pliers or hemostats, HCAR0625
● Hobby Knife (#11 blade), RMXR6900
● Clear tape
REPAIRS
Stock No. Description
FLZA6244 1S LiPo Charger
FLZA6565 Wing Parts Set
FLZA6566 Fuselage Parts Set
FLZA6567 Tail Surface Parts Set
FLZA6568 Nacelles Set
FLZA6569 Canopy Hatch
FLZA6570 Tail Gunner Canopy
FLZA6571 Wheels/landing Gear Set
FLZA6572 Propeller Set (L&R)
Stock No. Description
FLZA6573 Spinner Set (L&R)
FLZA6574 Plastic Parts Set
FLZA6575 Motor Set (L&R)
FLZA6576 Aileron Servos Set
FLZA6577 Receiver/ESC/Servos Board
FLZA6578 Gearbox Parts Set (1 set)
GPMP0770 1S 3.7V 250mAh 20C LiPo
TACJ2403 TTX403 4-Channel SLT Mini Transmittter
To order replacement parts for the Micro B-25 Mitchell, use the order numbers in the list below. Replacement parts are
available only as listed. Replacement parts are not available from Product Support, but can be purchased from hobby
shops or mail order/Internet order firms. If you need assistance locating a dealer to purchase parts from, contact:
Product Support
Phone: 217-398-0007
Fax: 217-398-7721
E-mail: productsupport@hobbico.com
REPLACEMENT PARTS