FMC Technologies INVALCO 64908265 - Turbine Flowmeter Cables; Cable Assembly Options and Specs

9
Issue/Rev. 0.6 (2/06)
Turbine Flowmeter Cable Assemblies
Turbine flowmeter cables are 18 gauge shielded, heavy duty neoprene-jacketed complete with mating connector
for magnetic pickup and terminated for interconnection to a readout or junction box.
Standard Cable Assembly (Figure 11)
The standard cable is made up of two conductor cables with a 10Sl-4S connector for mating with the standard
magnetic pickup or the low drag magnetic pickup. Maximum Temperature: +225°F
High Temperature Cable Assembly (Figure 12)
The high temperature cable is made up of two conductor cable with a high temperature version of the 10SL-4S
connector for mating with the extended temperature magnetic pickup. Maximum temperature: +450°F
Length
8”
15’
25’
50’
Part No.
81001471
81001483
81001484
81001479
High Temperature
Turbine Meter
Cable Assembly
Length
8”
15’
25’
50’
Part No.
81001471
81001483
81001484
81001479
Standard Turbine Meter Cable
Assembly
Pre-Amplifier and RF Cable Assembly (Figure 13)
The pre-amp/RF cable is made up of three conductor cable with a 10SL-3S connector for mating with the pre-
amplifier or RF pickup. Maximum temperature: +225°F
Length
8”
15’
25’
50’
Part No.
81001485
81001494
81001507
81001510