FMS J-3 Cub - Plane Assembly and CG; Center of Gravity (CG) Balancing

Assemble the plane
Check the C.G. (Center of Gravity)
13
Center of Gravity
When balancing your model , adjust the motor battery as necessary so the model is level or
slightly nose down. This the correct balance point for your model. After the first flights, The
CG position can be adjusted for your personal preference.
1. The recommended Center of Gravity (CG) location for your model is (45 mm) back from
the leading edge of the top main wing as shown with the battery pack installed.Mark the
location of the CG on top of the wing.
45mm