FMT Swiss AG NUMERIxx3 - Hazard Warning Symbols; General Symbols; 2 Safety Notes

5
Operating instructions - digital oval gear meter and pulse meter
US
NOTE
Indicates further information or tips which facilitate work.
1.3.2 Hazard warning symbols
Symbol Meaning
General hazard symbol. The warning note marked in this way contains
supplementary information on the type of hazard.
This symbol warns of dangerous electrical voltages.
This symbol warns of a hazardous explosive atmosphere.
1.3.3 General symbols
Symbol Meaning

A small black square indicates the work you have to perform.
–
The dash denotes lists.
a
The arrow identies cross-references.
If cross-references to other chapters are required within the text, the expression
is shortened for reasons of clarity.
Example: a Chapter 2 Safety notes
This means: please refer to chapter 2 for the safety notes
2. Safety notes
Various dangers may occur if the oval gear meter is improperly handled during installation, commissio-
ning and daily operation.
WARNING
Risk of injury and damage to material property because of improper handling!
Hold the manual at the disposal of the operating sta at the usage site of the unit.
Country-specic safety measures and accident prevention regulations must
be observed.