FMX TD400-2015-3PH - Chapter 1: Safety Precautions; Chapter 2: Model Description; Chapter 3: Environment and Installation; Chapter 4: User Interface and Programming

Table of Contents
Chapter 1: Safety Precautions
1.1 Before supplying Power to the AC Drive 1-1
1.2 Wiring 1-1
1.3 Before Operation 1-2
1.4 Auto Tuning 1-2
1.5 Operation 1-2
1.6 Maintenance, Inspection, and Replacement 1-3
1.7 Disposal of the AC Drive 1-3
1.8 UL Standards 1-4
Chapter 2: Model Description
2.1 Nameplate Data 2-1
2.2 Wire Gauge, Tightening Torque, Terminal, Short Circuit, Circuit Breaker, and Fuse Ratings 2-2
2.3 AC Drive Specifications 2-3
2.4 General Specifications 2-6
2.5 AC Drive Dimensions 2-7
Chapter 3: Environment and Installation
3.1 Environment 3-1
3.2 Installation 3-2
3.3 External View 3-3
3.4 Warning Labels 3-5
3.5 Removing the Front Cover 3-5
3.6 Wiring Peripheral Power Devices 3-6
3.7 General Wiring Diagram 3-8
3.8 Control Circuit Terminals and Jumpers 3-9
3.9 Power Terminals 3-10
3.10 AC Drive Wiring 3-11
3.11 Input Power and Motor Cable Length 3-12
3.12 Cable Length vs. Carrier Frequency 3-12
3.13 Installing an AC Line Reactor 3-12
3.14 Power Input Wire Size, and NFB 3-13
3.15 Control Circuit Wiring 3-13
3.16 AC Drive derating based on Carrier Frequency 3-13
3.17 Braking resistors 3-14
Chapter 4: User Interface and Programming
4.1 LED Keypad 4-1
4.1.1 LED Keypad Display and Keys 4-1
4.1.2 Display Description 4-2
4.1.3 LED Status Description 4-4
4.1.4 Operation Control 4-5
4.1.5 Using the Keypad 4-6
4.2 Parameter Summary 4-8
4.2.1: Parameter default values and ranges depending on AC Drive model 4-40
4.3 Parameter Details 4-42
Group 00 Basic Parameters 4-42
Group 01 V/F Control Parameters 4-52
Group 02 IM Motor Parameters 4-61
Group 03 External Digital Input and Output Parameters 4-65
Group 04 Analog Signal Inputs / Analog Output 4-87