Mechanical remote control
The safety system, where installed, does not allow starting the engine with the gear engaged. The
purpose of this is to avoid inadvertently starting the engine with propeller spinning causing damage to
people in the water.
Panel mounted type
Neutral lock button - Prevents accidental shift engagement.
Throttle only button – It allows engine throttle advancement without shifting the engine.
Lanyard stop switch - Turns off the engine in case the conductor accidentally moves away from the
driver's seat or in case of MOB.
Control Handle - the shift and throttle are controlled by the movement of control handle.
Trim/Tilt activates the trim pump.
Trailer activates the trim pump and pulls the stern drive completely out of the water. (undefined
application)
To Next Page
