Focus T.E.C. Pack Box - Remove Connector

Additional Guide | T.E.C. PACK for Shimano Steps E8000 Version 1 EN-11
First, the external battery discharges. Accordingly the
battery state of the external battery rst appears on the
display. When the external battery is empty the motor
support switches o. The T.E.C. Connector between battery
and socket on the frame must be released. The pedelec goes
o and must be switched on about the
-button again.
3.3.7 Remove connector
1. For easy transport plug in the
T.E.C. Connector on bottom
side of the toptube.
for 1. Plug in the T.E.C. Connector
for 1. Safe transport of the Connector