7
7.
USB LED – a green LED which illuminates when the unit is recognised by the computer
to which it is connected.
8. MIDI LED – a green LED illuminates when MIDI data is received at the MIDI IN port.
9. MONITOR – main monitor output level control – this is an analogue control and adjusts the
level at Outputs 1 and 2 on the rear panel.
10. MUTE – push this button to mute Outputs 1 and 2. The button illuminates when MUTE is
active.
11. – connect one or two pairs of stereo headphones at the two ¼” (6.25 mm) TRS jack sockets
below the headphone volume controls 1 and 2. The headphone outputs always carry the
signals that are currently routed to analogue outputs 3 & 4 and 5 & 6 respectively (as stereo
pairs) in Focusrite Control.
To Next Page
Loading...
