16
FOCUSRITE CONTROL - OVERVIEW
Focusrite Control is the software application used with the Clarett 4Pre. It allows you to create
a custom monitor mix for each musician, and also to specify the routing of all audio signals to
the physical audio outputs. All sample rate selection, digital syncing and buffer size settings
(Windows only) are available from Focusrite Control.
Note: Focusrite Control is a generic software application, and may be used with other
hardware interfaces in the Focusrite Clarett range. When you connect a Clarett interface
to your computer and launch Focusrite Control, the model of interface is automatically
detected, and the software configured to suit the number of inputs and outputs, and other
facilities, available on the hardware.
Focusrite Control has its own, dedicated User Guide, which contains detailed
operating instructions for all aspects of the software. This may be downloaded from
http://www.focusrite.com/downloads.
To Next Page
Loading...
