5
GETTING STARTED
IMPORTANT: Please ensure that you install the Clarett 4Pre drivers before connecting
the interface to your computer.
Software Installation
All software required by the Clarett 4Pre, including several powerful and useful extras, is available
for download from the Focusrite website (www.focusrite.com/register). The Important Information
provided with your Clarett 4Pre contains validation codes which you will need to enter at the above
web address. This procedure ensures that you will have the most up-to-date software versions.
xxxxxx-xxxxxx-xxxxxx
xxx-xxx-xxx-xxx
1. Using your usual browser, go to www.focusrite.com/register/.
2. Follow the on-screen instructions, entering the “Bundle Code” into the form where prompted.
Your Bundle Code can be found on the Important Information packed with the unit.
3. You will then be able to access the “My Products” page, where the software products to which your
registration entitles you are available for download, complete with activation codes where applicable.
4. Download and install the Focusrite Control software application. Follow all on-screen instructions.
5. When the installation is complete, you will be prompted to restart your computer.
6. After restart, connect the Clarett 4Pre to your computer with a Thunderbolt cable.
7. If you are having trouble getting started please watch our video guide here -
www.focusrite.com/get-started/clarett-4pre.
To Next Page
Loading...
Need help?
General
