Need help?Do you have a question about the Focusrite OctoPre MkII and is the answer not in the manual?
General| Number of Channels | 8 |
|---|---|
| Preamps | 8 |
| Digital Outputs | ADAT |
| ADAT Output | Yes |
| Power Supply | External PSU |
| Analog Inputs | 8 |
| Analog Outputs | 8 |
| Phantom Power | Yes |
| Frequency Response | 20 Hz to 20 kHz |
| THD+N | 0.002% |
| Noise (EIN) | -128 dBu |
| Gain Range | 10 dB to 60 dB |
| Type | 8-channel microphone preamplifier and A/D converter |
| Word Clock | Word Clock I/O |
Details safety warnings, hazard symbols, and their meanings for user protection.
Provides numbered instructions for the safe use, installation, and maintenance of the apparatus.
Welcome message and overview of the OctoPre MkII's capabilities and intended use.
Lists all accessories and documentation provided with the OctoPre MkII unit.
Details the input and output connectors located on the rear of the OctoPre MkII.
Describes the buttons, knobs, LEDs, and input jacks on the front of the unit.
Explains connecting Mic, Line, and Instrument signals using the Neutrik combo input jacks.
Guides on adjusting input gain using LED metering to optimize signal levels and prevent clipping.
Details the +48V phantom power feature for microphones and warnings for specific mic types.
Explains the use of analogue line outputs for connecting to external audio devices.
Describes using ADAT optical outputs for digital audio transfer at different sample rates.
Explains clock source settings for synchronizing the OctoPre MkII with other digital equipment.
Illustrates connecting the OctoPre MkII as the master clock to an audio interface via ADAT.
Shows a setup where the audio interface serves as the master clock for the OctoPre MkII.
Details a configuration using SMUX for higher sample rates between OctoPre MkII and Liquid Saffire 56.
Explains how to connect the OctoPre MkII to an analogue mixing desk using standard jack cables.
Lists frequency response, THD+N, and noise specs for microphone inputs.
Lists frequency response, THD+N, and noise specs for line inputs.
Lists frequency response, THD+N, and noise specs for instrument inputs.
Covers digital I/O, clocking, A/D range, and jitter specifications.
Details weight, dimensions, analogue I/O, digital I/O, power, and front panel indicators.
To Next Page