10
WEIGHT and DIMS
3kg - 35cm x 4.5cm x 26.5cm.•
ANALOGUE INPUTS
Mic / Line inputs on XLR Combo with auto-switching between Mic (XLR) and Line / Instrument (TRS).•
Mic / Line / Instrument 1 & 2: 2 x XLR Combo on front panel.•
Mic / Line 3-8: 6 x XLR Combo.•
Instrument: As above, switched to Instrument (inputs 1 & 2 only).•
Mic Gain: +10dB to + 55dB.•
Line 1-8 Gain: -10dB to +36dB.•
Instrument Gain: +10dB to +55dB.•
Input Pad on inputs 1-8, ~-10dB.•
Phantom power switched in 4 channel groups on Mic. 1-4 and 5-8.•
Mic and instrument maximum input level +8dBu (+16dBu with pad on input).•
Line maximum input level +22dBu.•
ANALOGUE OUTPUTS
Line level 8 x 1/4” TRS Jack.•
Nominal output level 0dBFS = 16dBu, balanced.•
Frequency Response: 20Hz – 20kHz +/- 0.2dB.•
THD+N • <0.0010% (-100dB) (measured with 0dBFS input 22Hz/22kHz bandpass lter, un-weighted).
DIGITAL I/O
ADAT Out 1 & 2: 8 channels (44.1 / 48kHz) 4 channels S-MUX (88.2 / 96kHz, 8 channels total).•
POWER
Internal Universal Input PSU.•
FRONT PANEL INDICATORS
Metering of analogue inputs (channels 1-8), 5 segment (-42, -18, -6, -3 and 0dBFS).•
4 Sample Rate LED’s (44.1k, 48k, 88.2k & 96k).•
2 Sync Source LED’s (Internal, Word Clock).•
‘Lock’ Indicator LED.•
Troubleshooting
For all troubleshooting queries, please visit the Focusrite Answerbase where there are articles covering numerous troubleshooting
examples. www.focusrite.com/answerbase.
E & O.E.
To Next Page
Loading...
Need help?
General