Need help?Do you have a question about the Focusrite ISA 828 and is the answer not in the manual?
General| Gain | 40 dB |
|---|---|
| Control type | Buttons, Rotary |
| Sample rates | 48 - 192 kHz |
| On/off switch | Yes |
| Phantom power | 48 V |
| Product color | Black |
| LED indicators | Power, Signal strength |
| Built-in display | No |
| Total Harmonic Distortion (THD) | 0.002 % |
| XLR inputs | 8 |
| 6.35 mm (1⁄4-inch) input | 4 |
Weight and Dimensions| Depth | 305 mm |
|---|---|
| Width | 484 mm |
| Height | 85 mm |
| Weight | 8840 g |
Essential safety guidelines for operating the ISA 828 to prevent damage or injury.
Guide to connecting the unit, power switch operation, and wiring colour codes.
Controls for gain, phantom power, phase, HPF, input selection, and impedance.
Description of all rear panel connectors including IEC, digital, analogue, and ADC inputs.
Information on ADC card installation, AES, S/PDIF, and ADAT™™ digital output formats.
Using insert points for external signal processing and routing.
To Next Page