Focusrite Red 3 User Manual

Red Range Manual
featuring Red 1,3,7 & 8

Focusrite Red 3 Specifications

General

Sidechain Input	Yes
Maximum Output Level	+26dBu
Noise	<-90dBu (20Hz to 20kHz)
Release Time	50ms to 5s
Inputs	XLR, 1/4" TRS
Outputs	XLR, 1/4" TRS
Power Supply	Internal PSU, 100-240V, 50-60Hz

Summary

Accuracy & Warranty Information

Warranty Terms and Conditions

Details warranty against manufacturing defects for one year, covering repair or replacement.

Power Set Up and Connections

Power Supply Settings

Details voltage selection (115V/230V) and operation from 50 Hz or 60 Hz power supplies.

Signal Connections

Red 1 Four Channel Microphone Preamplifier

Setting the Gain

Guides on adjusting gain to match input level and achieve optimal signal-to-noise ratio.

Setting the Phase

Recording in Stereo

Red 3 Compressor/Limiter

Red 3 Compressor Controls

Setting the Ratio

Guides on adjusting the ratio to control the amount of compression applied to the signal.

Setting the Threshold

Explains how to set the threshold to determine when compression begins on loud passages.

Attack and Release Controls

Setting the Attack Rate

Guides on adjusting the attack rate for gradual compression and preserving note presence.

Setting the Release Rate

Make-up Gain Function

Limiter Functionality

Using the Key Input

Stereo Compression and Limiting

How to Use Compression

Provides a step-by-step guide for setting up and adjusting compressor controls effectively.

When to Use Compression

Red 7 Microphone Preamplifier and Dynamics

Microphone Preamplifier Features

Compressor Features

De-esser and Exciter Functions

Module Troubleshooting and Fuse Replacement

Troubleshooting Non-Operation

Provides steps to check mains supply, switches, and LEDs when a module does not operate.

Changing a Fuse Procedure

Details the procedure for safely changing fuses in Red modules, excluding power amplifiers.