Need help?Do you have a question about the Focusrite OctoPre MkII Dynamic and is the answer not in the manual?
Details FCC rules, US/Canada compliance, and RoHS notice.
Details the input and output connections on the rear of the OctoPre MkII Dynamic.
Describes the controls and indicators found on the front of the OctoPre MkII Dynamic.
Explains the professional combo connectors that accept XLR and jack inputs.
Details the 48V phantom power for condenser microphones on specific inputs.
Guides on setting preamp gain using LED metering and handling overload signals.
Introduces the compressor control for applying dynamic range compression and make-up gain.
Illustrates compressor curves for normal and more modes with attack/release times.
Explains connecting to analogue devices using line outputs and signal levels.
Describes the 5-segment LED meters for monitoring signal levels before AD/DA conversion.
Details connecting to digital devices via ADAT optical outputs for various sample rates.
Explains using ADAT inputs as a digital-to-analogue converter to expand computer audio outputs.
Illustrates connecting OctoPre MkII Dynamic to an audio interface with the former as master.
Shows connecting OctoPre MkII Dynamic to an interface with the latter as master.
Demonstrates AD/DA audio transfer between OctoPre MkII Dynamic and an interface using ADAT.
Explains high-sample-rate audio transfer using SMUX mode with ADAT and word clock.
Details connecting OctoPre MkII Dynamic's analogue outputs to a mixing desk via loom.
Shows simultaneous analogue and digital output for monitoring and recording.
Specifies performance metrics for microphone inputs, including frequency response and noise.
Details specifications for line inputs, including THD+N and noise levels.
Lists performance specifications for instrument inputs, such as frequency response and THD+N.
Outlines digital performance aspects like clock sources, A/D, D/A range, and jitter.
Describes input types, gain ranges, phantom power, and maximum input levels.
Provides detailed specifications for the compressor, including threshold, ratio, and attack/release times.
Specifies performance for analogue line outputs, including level, frequency response, and THD+N.
Details the capabilities of ADAT outputs and inputs for various sample rates and channels.
Mentions the internal universal input power supply unit.
Lists and explains the indicators on the front panel, including metering and sync LEDs.
Provides the weight and physical dimensions of the OctoPre MkII Dynamic unit.
To Next Page
General