EasyManuals Logo

Focusrite OctoPre MkII Dynamic User Manual

Focusrite OctoPre MkII Dynamic
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13
Performance Specications
MIC
Frequency response: 20Hz - 20kHz +/- 0.1 dB.
Maximum input level (Gain at Minimum): +16dBu.
THD+N: 0.001% (measured at 1kHz with a 20Hz/22kHz bandpass lter).
Noise: EIN > 125dB (128dB analogue to digital): measured at ~60dB of gain with 150 Ohm termination (20Hz/22kHz
bandpass lter).
LINE
Frequency response: 20Hz - 20kHz +/- 0.1dB.
THD+N: < 0.001% (measured with 0dBFS input and 22Hz/22kHz bandpass lter).
Noise: -90dBu (22Hz/22kHz bandpass lter).
INSTRUMENT
Frequency response: 20Hz - 20kHz +/- 0.1dB.
THD+N: 0.004% (measured with 0dBu input and 20Hz/22kHz bandpass lter).
Noise: -87dBu (20Hz/22kHz bandpass lter).
DIGITAL PERFORMANCE
Clock sources:
Internal clock.
Sync to word clock Input.
Sync to ADAT Input (ADAT 1 input only).
A/D dynamic range 110dB 'A-weighted' (all inputs).
D/A dynamic range 110dB 'A-weighted' (all outputs).
JetPLLTM PLL technology providing superb jitter reduction for class leading converter performance.
Clock jitter < 250 pico seconds.
Sample rates: 44.1kHz to 96kHz.
Sample rate clock accuracy: +/-20PPM.
ANALOGUE INPUTS
Mic / line inputs on XLR combo with auto-switching between mic (XLR) and line / instrument (TRS).
Mic / line / instrument 1 & 2: 2 x XLR Combo on rear panel.
Mic / line 3-8: 6 x XLR combo.
Instrument: As above, switched to instrument (inputs 1 & 2 only).
Mic gain: +10dB to + 55dB.
Line 1-8 gain: -10dB to +36dB.
Instrument gain: +10dB to +55dB.
Phantom power switched in 4 channel groups on mic 1-4 and 5-8.
Mic and instrument maximum input level +16dBu.
Line maximum input level +26dBu.
COMPRESSORS
Threshold range: -44dBFS (Max setting) to -4dBFS (Min setting).
Compression ratio: Normal - 2:1, More: 4:1.
Auto make-up gain: 4dB (min setting), 18dB (max setting).
Attack time: 1.2ms, release time: 28ms (-3.5dB method).
Compression curve: classic focusrite soft knee.
THD+N (maximum at any compression threshold, input < +16dBu, gain at minimum): < 0.18%

Other manuals for Focusrite OctoPre MkII Dynamic

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Focusrite OctoPre MkII Dynamic and is the answer not in the manual?

Focusrite OctoPre MkII Dynamic Specifications

General IconGeneral
BrandFocusrite
ModelOctoPre MkII Dynamic
CategoryAmplifier
LanguageEnglish

Related product manuals