14
ANALOGUE OUTPUTS
• Line level 8 x 1/4” TRS Jack.
• Nominal output level 0dBFS = 16dBu, balanced.
• Frequency response: 20Hz – 20kHz +/- 0.2dB.
• THD+N < 0.0010% (-100dB) (measured with 0dBFS input 22Hz/22kHz bandpass lter, un-weighted).
• Switching to enable monitoring of A/D inputs or ADAT inputs with ADDA switch.
DIGITAL I/O
• ADAT Out 1 & 2: 8 channels (44.1 / 48kHz), 4 channels SMUX (88.2 / 96kHz, 8 channels total).
• ADAT In 1 & 2: 8 channels (44.1 / 48kHz, ADAT 1 only), 4 channels SMUX (88.2 / 96kHz, 8 channels total).
POWER
• Internal universal input PSU.
FRONT PANEL INDICATORS
• Metering of analogue inputs (channels 1-8), 5 segment (-42, -18, -6, -3 and 0dBFS).
• 4 sample rate LED’s (44.1k, 48k, 88.2k & 96k).
• 3 sync source LED’s (Internal, Word Clock and ADAT).
• ‘Lock’ indicator LED.
• ADDA switch for analogue output source selection (A/D’s or ADAT inputs).
WEIGHT and DIMS
• 3kg - 35cm x 4.5cm x 26.5cm.
Troubleshooting
For all troubleshooting queries, please visit the 'Focusrite Answerbase' where there are articles covering numerous
troubleshooting examples. www.focusrite.com/answerbase.
Focusrite is a registered trade mark of Focusrite Audio Engineering Limited.
OctoPre is a trade mark of Focusrite Audio Engineering Limited.
2009 – 2010 © Focusrite Audio Engineering Limited. All rights reserved
To Next Page
Loading...
Need help?
General