Horizon Elite
™
remote 1810, 2110 series Chewblet® ice machine
Short form specification:
Ice machine to be a Follett® Horizon Elite ice machine model
______________ [Insert size/series,condenser type and installation/
mounting, from model number guide] capable of producing compressed
nugget ice using an ecient, sanitary horizontal evaporator/auger system
and delivering ice by a flexible wire reinforced transport tube to
ice storage bin, iceand water dispenser, ice and beverage dispenser,
drop‑in dispenser or Ice Manager
™
diverter valve system, slide‑out
evaporator with utility docking station, front‑mounted unit status display,
evaporator water inlet at harvest end with automatic flush while producing
ice, and semi‑automatic cleaning and sanitizing system, plus all the features
listed below and mounting/performance‑enhancing accessories checked.
801 Church Lane | Easton, PA 18040, USA
1.800.523.9361 | 1.610.252.7301 | follettice.com
1
Independent third party studies. Contact Follett for details.
2
Disclaimer: Antimicrobial protection is limited to the treated components and does not treat water or ice.
³ Refer to price list for additional warranty information.
Features
Horizon Elite
1810 series ‑ up to 1784 lb (810 kg) in 24 hours
2110 series ‑ up to 2039 lb (925 kg) in 24 hours
‑ automatically transport ice through a tube with RIDE
®
technology from up to 75' (22.9 m) away
‑ chewable, compressed nugget ice is preferred over cubes¹
‑ Chewblet ice dispenses reliably from ice and
beveragedispensers
‑ available with approximately 1.00" (2.54 cm) long standard
Chewblet ice or optional 3/8" (0.95 cm) long Micro
Chewblet
™
ice
‑ quiet production without noisy harvest cycles
Revolutionary, scale inhibiting design
‑ produces ice that has 15% the TDS of the incoming water for
optimum dispensing and long life in drinks
‑ quarantines and regularly expels scale producing dissolved
solids to dramatically reduce scalebuildup
‑ increases time between descaling and reduces or eliminates
the need for expensive scale treatment
‑ saves 35% water compared to comparable cubers
‑ three phase models ENERGY STAR
®
certified
Durable, attractive ice machine
‑ regular bearing inspection or replacement is notrequired
‑ upgraded, easy‑to‑read LED operating status and
diagnosticdisplay
Designed with sanitation in mind
‑ Agion
®
silver‑based antimicrobial product protection of key
ice and water contact components²
‑ floatless, sealed design inhibits formation of biofilms
‑ semi‑automatic cleaning and sanitizing system
Warranty
‑ 3 years parts and labor, 5 years compressor parts ³
Certifications
Model configurations
For use with
1
Install/
mount Condenser Evaporator
Item number
2
1810 series
Item number
2
2110 series
ice storage bin
top
mount
with 115/60/1
4, 5
HCD1810RBT HCD2110RBT
without 115/60/1 HCD1810NBT HCD2110NBT
RIDE
with 115/60/1
4, 5
HCD1810RBS HCD2110RBS
without 115/60/1 HCD1810NBS HCD2110NBS
Follett Vision
™
undercounter
ice and beverage
dispenser
RIDE
with 115/60/1
4, 5
HCD1810RVS HCD2110RVS
without 115/60/1 HCD1810NVS HCD2110NVS
countertop ice
and beverage
dispenser
(by others)
top
mount
3
with 115/60/1
4, 5
HCD1810RHT HCD2110RHT
without 115/60/1 HCD1810NHT HCD2110NHT
RIDE
with 115/60/1
4, 5
HCD1810RHS HCD2110RHS
without 115/60/1 HCD1810NHS HCD2110NHS
drop-in dispenser
(by others)
RIDE
with 115/60/1
4, 5
HCD1810RJS HCD2110RJS
without 115/60/1 HCD1810NJS HCD2110NJS
Ice Manager
diverter
valve system
RIDE
with 115/60/1
4, 5
HCD1810RMS HCD2110RMS
without 115/60/1 HCD1810NMS HCD2110NMS
¹ Ordered separately.
² For Micro Chewblet ice, replace second character (C) with an M
e.g. HMD2110RBT.
³ Requires top kit (see page 5 for part number).
⁴ Condensing unit is 208-230/60/1.
⁵ For three phase remote condensing unit, replace third character (D) with an F
e.g. HCF1810RBT.
To Next Page
Need help?
General
