Horizon Elite
™
self-contained 710 series Chewblet
®
ice machine
801 Church Lane | Easton, PA 18040, USA
1.800.523.9361 | 1.610.252.7301 | follettice.com
Features
Horizon Elite
710 series - up to 759 lb (345 kg) in 24 hours
- automatically transport ice through a tube with RIDE
®
technology from up to 75' (22.9 m) away
- chewable, compressed nugget ice is preferred
over cubes¹
- Chewblet ice dispenses reliably from ice and
beveragedispensers
- available with approximately 1.00" (2.54 cm) long standard
Chewblet ice or optional 3/8" (0.95 cm) long Micro
Chewblet
™
ice
- quiet production without noisy harvest cycles
Revolutionary, scale inhibiting design
- produces ice that has 15% the TDS of the incoming water for
optimum dispensing and long life in drinks
- quarantines and regularly expels scale producing dissolved
solids to dramatically reduce scalebuildup
- increases time between descaling and reduces or eliminates the
need for expensive scale treatment
- saves 35% water compared to comparable cubers
- HCD and HMD models ENERGY STAR
®
certified
Durable, attractive ice machine
- regular bearing inspection or replacement is notrequired
- upgraded, easy-to-read LED operating status and
diagnosticdisplay
Designed with sanitation in mind
- Agion
®
silver-based antimicrobial product protection of key ice
and water contact components²
- floatless, sealed design inhibits formation of biofilms
- semi-automatic cleaning and sanitizing system
Warranty
- 3 years parts and labor, 5 years compressor parts ³
Certifications
1
Independent third party studies. Contact Follett for details.
2
Disclaimer: Antimicrobial protection is limited to the treated components and does not treat water or ice.
³ Refer to price list for additional warranty information.
Short form specification:
Ice machine to be a Follett
®
Horizon Elite ice machine model
______________ [Insert size/series,condenser type and installation/
mounting, from model number guide] capable of producing compressed
nugget ice using an ecient, sanitary horizontal evaporator/auger
system and delivering ice by a flexible wire reinforced transport tube to
ice storage bin, iceand water dispenser, ice and beverage
dispenser or
drop-in dispenser and provided with a stainless steel
frame and exterior, slide-out compressor/condenser with utility docking
station, front-mounted unit status display, evaporator water inlet
at harvest end with automatic flush while producing ice, and semi-
automatic cleaning and sanitizing system, plusall the featureslisted
below and mounting/performance-enhancing accessories checked.
Model configurations
For use with
1
Install/mount Condenser V/Hz/Ph Item number
2
ice storage bin
top mount
air
115/60/1
HCD710ABT
230/50/1
HCE710ABT
RIDE
air
115/60/1
HCD710ABS
230/50/1
HCE710ABS
Follett Vision
™
undercounter
ice and beverage
dispenser
RIDE
air
115/60/1
HCD710AVS
230/50/1
HCE710AVS
countertop
ice and beverage
dispenser
(by others)
top mount
3
air
115/60/1
HCD710AHT
230/50/1
HCE710AHT
RIDE
air
115/60/1
HCD710AHS
230/50/1
HCE710AHS
drop-in dispenser
(by others)
RIDE
air
115/60/1
HCD710AJS
230/50/1
HCE710AJS
1
Ordered separately.
2
For Micro Chewblet ice, replace second character (C) with an M
e.g. HMD710ABT.
3
Requires top kit (see page 4).
“E” models only