Name: Fora G20
Brand: Fora
Rating: 4 (1 reviews)

Other manuals for Fora G20

Owner's Booklet104 pages

Questions and Answers:

D
Darius PhillipsJul 27, 2025
What to do if Fora Blood Glucose Meter test does not start after applying sample?
- R
  Rachael MartinezJul 28, 2025
  If the test does not start after you apply the sample to your Fora Blood Glucose Meter, it could be due to several reasons: * You might not have used enough blood. Try again with a new test strip and a larger blood sample. * The test strip could be faulty, so try a new one. * You may have applied the sample after the meter shut off automatically. Make sure to apply the sample when the flashing symbol appears on the display and use a new test strip. * In case the meter is defective, please contact customer services.
S
Shane ChavezAug 2, 2025
Why Fora G20 does not display message after inserting test strip?
- J
  jeffrey75Aug 3, 2025
  If your Fora Blood Glucose Meter doesn't display a message after inserting a test strip, here are a few things to check: 1. The battery may be dead, so try replacing it. 2. Make sure you've inserted the test strip correctly, with the contact bar end going in first and facing up. 3. If neither of those fixes the problem, there might be an issue with the meter or the test strips. In that case, please contact customer services.
E
Elizabeth ReeseAug 9, 2025
How to fix a Fora Blood Glucose Meter control solution testing result that is out of range?
- H
  Howard HolmesAug 9, 2025
  If the control solution testing result is out of range on your Fora Blood Glucose Meter, ensure you're performing the test correctly by reading the instructions thoroughly and repeating the test. Vigorously shake the control solution vial before testing. Check that the control solution hasn't expired or become contaminated. Also, make sure the control solution, meter, and test strips are at room temperature (20°C to 25°C / 68°F to 77°F) before testing. Finally, try repeating the test with a new test strip.