Need help?Do you have a question about the Fora 6 Connect and is the answer not in the manual?
Defines the system's purpose for diabetes monitoring.
Guides users through first-time setup or setup after battery replacement.
Covers setting date, time, tones, and alarms for device operation.
Ensures accurate results by matching meter code to test strips.
Procedures for obtaining fingertip blood samples for testing.
How to choose the appropriate test mode (Gen, AC, PC, QC).
Steps for skin puncture and collecting blood sample for testing.
Method for applying collected blood sample correctly to the test strip.
How to read meter results and understand the countdown process.
Conditions indicating the need for control solution testing.
Instructions for safely replacing meter battery and resetting settings.
Lists common error codes, their causes, and recommended actions.
General| Sample Size | 0.5 μL |
|---|---|
| Test Time | 5 seconds |
| Connectivity | Bluetooth |
| Power Source | 2 x AAA Batteries |
| Measurement Range | 20 to 600 mg/dL |
| Measurement Method | Electrochemical |
| Sample Type | Capillary whole blood |
| Operating Temperature | 10°C to 40°C |
To Next Page
