What to do if Fora Blood Glucose Meter result is below measurement limit?
If your Fora Blood Glucose Meter displays a result below 20 mg/dL (1.1 mmol/L), indicating hypoglycemia, you should seek immediate medical assistance.
What to do if result is higher than 240 mg/ dL Fora Blood Glucose Meter?
If your Fora Blood Glucose Meter displays a result equal to or higher than 240 mg/dL (13.3 mmol/L), it suggests a possibility of ketone accumulation if you have type 1 diabetes. Please seek immediate medical assistance.
What to do if Fora Blood Glucose Meter result is above measurement limit?
If your Fora Blood Glucose Meter displays a result above 600 mg/dL (33.3 mmol/L), which indicates severe hyperglycemia, you should seek immediate medical assistance.
Why Fora Blood Glucose Meter not displaying message after inserting test strip?
If the Fora Blood Glucose Meter doesn't display a message after inserting a test strip, several factors could be at play. First, ensure the batteries aren't exhausted by replacing them. Next, verify the batteries are correctly installed. Also, check that the test strip is inserted correctly, with the contact bars end going in first. If none of these steps work, the meter may be defective, and you should contact Customer Care for assistance.
What to do if control solution test result is out of range Fora Blood Glucose Meter?
If the control solution test result is out of range on your Fora Blood Glucose Meter, first, read the instructions thoroughly and repeat the test. Make sure to shake the control solution vigorously before testing again. Check the expiration and disposing dates of the control solution. Ensure the control solution, meter, and test strips are at room temperature (68 to 77°F/20 to 25°C). Repeat the test with a new test strip. If problems persist, the meter may be malfunctioning, and you should contact Customer Care.
Why test does not start after applying the sample Fora Blood Glucose Meter?
If the test on your Fora Blood Glucose Meter doesn't start after applying the sample, it could be due to a few reasons. You might not have used enough blood, so try repeating the test with a new strip and a larger sample. The test strip itself could be defective, so try a new one. Also, make sure you're applying the sample when the appropriate symbol appears on the display, as the meter might have shut off automatically if too much time has passed since the last action.
Detailed steps for conducting a control solution test on the blood glucose meter.
Lists required items and important safety warnings for blood glucose testing.
Instructions on how to prepare the lancing device for obtaining a blood sample.
Guides on inserting test strips and obtaining a blood sample from fingertips or other sites.
Steps for applying blood to the test strip and getting the final glucose reading.
Instructions for safely removing the used lancet from the lancing device.
Explains risk messages like low/high glucose and ketone warnings, and recommended actions.
Lists common error codes, their meanings, and the steps to resolve them.
General| Brand | Fora |
|---|---|
| Model | V10 |
| Category | Blood Glucose Meter |
| Language | English |
To Next Page
