Fora V10 - Taking Care of Your Meter and Test Strips; Cleaning; Storage

38
TAKING CARE OF YOUR METER AND TEST STRIPS
To protect the monitor and test strips from dirt, dust and other
contaminants, please wash and dry your hands thoroughly before use.
Cleaning
1. To clean the meter’s exterior, wipe with a cloth moistened with tap water or a mild
cleaning agent, then dry the device with a soft and dry cloth. Do not ush with
water.
2. Do not use organic solvents to clean the meter
.
• Storage condition: -4°F to 140°F (-20°C to 60°C), below 95% relative humidity.
• Always store or transport the meter in its original storage case.
• Avoid dropping and strong impact.
• Avoid direct sunlight and humidity.
• Storage condition: 39.2°F to 104°F (4°C to
40°C), below 85% relative humidity. Do not
freeze.
• Store your test strips in their original vial only.
Do not transfer to another container.
Storage
1. Meter Storage
2. Strip Storage