15
BEFORE USE
Battery Replacement
Your meter comes with two 1.5V AAA alkaline batteries. The
meter will alert you when the power is low by displaying two
different messages:
1. With battery exhausted symbol ap-
pears on the display: the meter is functional
and the result remains accurate, but battery
should be replaced.
2.With battery exhausted symbol , low
and E-b symbols on the display: the batteries
can not provide enough power for a test. You
must replace the batteries immediately.
PLEASE NOTE
1. Replacing the batteries does not affect the meter’s memory (previous
test results stored in memory). The time and date settings may need to
be updated.
2. Batteries might leak chemicals if not used for a long time. Remove the
batteries if you are not going to use the device for an extended period
(i.e. 3 months or more).
To Next Page
Loading...
