29
When “ “ is ashing on the screen, apply
your blood to the absorbent hole of the test
strip until the conrmation window is fully
covered with blood. The meter will then
begin to count down automatically.
The result of your blood glucose test will
appear after counting down to 0. This
reading will automatically be stored in the
memory.
PLEASE NOTE
˙Choose a different spot each time you test. Repeated punctures at the
same spot may cause soreness and calluses.
˙Before you decide to begin AST, please consult your health
professional.
˙It is recommended that you discard the rst drop of blood as it might
contain tissue uid and serum, which may affect the test result.
STEP 4 Apply Blood into the Test Strip
STEP 5 Obtain AN Accurate Result in 7
Seconds
To Next Page
Loading...
