Fora 6 Connect - Performing A Test; Apply Blood Sample to Strip; Read and Interpret Results

EN-10
The blood sample size of each test should be at least,
• blood glucose test: 0.5μL
• blood glucose/ hematocrit/ hemoglobin test: 0.5μL
• β-ketone test: 0.8μL
• total cholesterol test: 3.0μL
• uric acid test: 1.0μL
4. Apply the blood sample.
Move your nger to meet the absorbent hole of the test
strip and the drop will be automatically be drawn onto the
test strip. Remove your nger until the conrmation
window is lled. The meter begins to count down. Do not
remove your nger until you hear a beep sound.
BG BG
BG BG BG
BG
BG B
BG BG BG
BG
G BG BG BG BG BG
BG BG B
G BG BG BG B
BG BG BG BG BG BG
G BG BG BG BG BG BG
BG
BG BG BG BG BG B
G
BG
5. Read your result.
The results of your test will appear after the meter counts
down to 0. The results will be stored automatically in the
meter memory.
(100 mg/dL = 5.5mmol/L)
Blood Glucose
Blood Glucose /
Hematocrit/
Hemoglobin
Uric Acid
β-Ketone
Total cholesterol
Ketone warning
• When your blood glucose result is higher than 240 mg/
dL (13.3 mmol/L), the meter will display the blood glucose
reading as well as a Ketone warning ( ashing KETONE
and “ ” ).