Force FS 1000 User Manual

9
Align the T-Rail sections on the floor.
Connect these rails together with the rail
couplers as shown
T-Rail
(Back)
All rail pieces must be aligned properly
T-Rail
(Center)
M8 Locknut x 8
Rail Coupler
M8*16 Carriage bolt x 8
T-Rail
(Front)
Ensure the square bolt necks are
seated into the square holes
Attached the Pulley
Bracket Assembly to the end
of the front rail with 2 M8*16
hex bolts and 2 M8 locknuts.
Align the Pulley Bracket & Rail
Sectional Steel T-Rail Assembly
STEP1:Connect the T-Rail Sections
STEP2:Attached the Pulley Bracket

Force FS 1000 Specifications

General

Brand	Force
Model	FS 1000
Category	Garage Door Opener
Language	English