Force JX-DS913 - Step 6: Seat and Leg Developer Mounts

Assembly Instructions
a.Attach the seat pad support(6#) to the front vertical frame(2#) and secure them with 2pcs M10*70
Carriage bolt(63#),1pc bracket(20#),2pcs
φ
10 washers(73#),2pcs M10 Aircraft nuts(77#) .
b.Attach the Leg developer Holder(5#) onto the base frame, Secure them with 2pcs M10*70 Carriage
bolt(63#),1pc bracket(20#),2pcs φ10 washers(73#),2pcs M10 Aircraft nuts(77#) .
c.Attach the Leg Developer Holder(5#) and another end of the seat pad support (6#)together,Secure
them with 2pcs M10*65 Allen Bolt (64#),4pcs φ10 washers(73#) and 2pcs M10 Aircraft nuts(77#) .
Step 6
11