Maintenance
and care
249
If the leather cannot be completely
cleaned using a mild soap and
water solution, the leather may be
cleaned using a commercially
available cleaning product Tanners
Preserve Leather Cleaner" and a
3M Type T" scrubbing pad by
using the following steps:
The type of scrubbing pad is
very critical because the
common 3M Scotch Brite"
green pad is too aggressive and
will damage the leather surface.
• Spray a small amount of the
leather cleaner on the pad and rub
the area to be cleaned with the pad
using a circular motion. Only clean
1/4 of the area at a time. For
heavily soiled areas, spray the
cleaner directly onto the leather
(two squirts should be adequate)
and rub with the pad. Repeat if
necessary.
• Use a soft, damp cloth to remove
the loosened dirt and foam.
• Dry with a soft cloth.
To Next Page
Loading...
