Controls
and features
75
1. Insert the first previously
programmed SecuriLockT key into
the ignition and turn the ignition
from OFF (2) to ON (3) (maintain
ignition in ON for at least one
second).
2. Turn ignition to OFF and
remove the first SecuriLockT key
from the ignition.
3. Within five seconds of turning
the ignition to OFF, insert the
second previously programmed
SecuriLockT key into the ignition
and turn the ignition from OFF to
ON (maintain ignition in ON for at
least one second but no more than
5 seconds).
4. Turn the ignition to OFF and
remove the second SecuriLockT
key from the ignition.
5. Within 10 seconds of turning the
ignition to OFF, insert the
unprogrammed SecuriLockT key
(new key/valet key) into the
ignition and turn the ignition from
OFF to ON (maintain ignition in
ON for at least one second). This
step will program your new
SecuriLockT key.
6. To program additional
SecuriLockT key(s), repeat this
procedure from step 1.
1
To Next Page
Loading...
