Intelligent Four-wheel drive
(4WD) (if equipped) + other
gauges
For a description of the other
gauges, see the descriptions listed
previously.
• Intelligent all-wheel drive: shows
the 4WD mode that the vehicle is
in. Refer to Four-Wheel Drive
(4WD) system and Terrain
management in the Driving chapter.
Trip1&2
Press the right arrow on the left steering wheel mounted button when
trip1&2isselected.Theboxes in the upper right corner of the screen
indicate that there are multiple screens that you can navigate through.
Each press of the right arrow will navigate to the next screen until the
last screen is reached. The white highlighted box indicates which of the
screens you are currently viewing:
Choose the standard or enhanced display. See the Settings chart
following to reach the trip display settings.
Standard trip display
• Trip distance — shows the accumulated trip distance
• Elapsed trip time — timer stops when the vehicle is turned off and
restarts when the vehicle is restarted.
F
6
4
RPM
1000
+
2
0
E
F
6
4
139.5 mi
Trip 1
00:58:44
RPM
1000
+
2
0
01234.5mi
E
Instrument Cluster
37
2011 Explorer (exp)
Owners Guide, 1st Printing
USA (fus)
To Next Page
Loading...
