Condition Potential Causes
I accidentally
programmed all keys as
MyKeys威
• Vehicle has a non Ford-approved remote
start system that is recognized as an admin
key. Refer to the Using MyKey威 with
remote start systems section to reset all
MyKeys威 as admin keys.
No MyKey威 function • An admin intelligent access key is present
at a push-and-start vehicle.
• No MyKeys威 are programmed to the
vehicle. Refer to Create a MyKey威 section.
• Vehicle has been started using a non
Ford-approved remote start system (as an
admin key) then a MyKey威 is inserted
without restarting the engine.
MyKey威 programmed
total includes one
additional key
• Unknown key has been programmed to the
vehicle as a MyKey威.
• Vehicle is equipped with a non
Ford-approved remote start system. Refer to
Using MyKey威 with remote start systems
section.
Admin keys
programmed total
includes one additional
key
• Unknown key has been programmed to the
vehicle as admin key.
• Vehicle is equipped with a non
Ford-approved remote start system. Refer to
Using MyKey威 with remote start systems
section.
MyKey威 distance does
not accumulate
• MyKey威 is not being used by the intended
user.
• MyKey威 system has been recently cleared.
• Vehicles has been remote started using a
non Ford-approved remote start system (as
if an admin key) then a MyKey威 is inserted
without recycling the MyKey威 in ignition.
Locks and Security
132
2012 Explorer (exp)
Owners Guide, 2nd Printing
USA (fus)
To Next Page
Loading...
