Front axle jacking point: Place the jack
under the pin on the front surface of the
front axle.
Note: Do not place the jack under or on the
steering linkage.
Turn the jack handle clockwise. For
hydraulic jacks, operate the handle
up-and-down until the wheel is completely
off the ground and high enough to install
the spare tire.
Installing the spare wheel and tire
1. Remove the lug nuts with the lug
wrench, replace the flat tire with the
spare, making sure the valve stem of
the spare is facing outward when
replacing a front wheel. For the rear
wheel position on vehicles with single
rear wheel fitments, install the spare
220
2023 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202111, First-Printing
Wheels and Tires