Service position
Switch off the ignition and move the wiper
lever to position A within three seconds.
Release the lever when the windshield
wipers have moved to the service position.
POWER WINDOWS
To reduce wind noise or buffeting when just
one window is open, open the opposite
window slightly.
BLIND SPOT INFORMATION
SYSTEM
Blind Spot Information System
(BLIS)
The system is a convenience feature that
assists you to detect vehicles that may have
entered your blind spot zones (A). The
detection area is on both sides of your
vehicle extending rearward from the
exterior mirrors to approximately 10 ft (3 m)
beyond the rear of your vehicle. The system
will alert you if certain vehicles enter your
blind spot zones while driving.
Using the System
The system displays a yellow indicator
located in the exterior mirrors.
Detection Limitations
There may be instances where vehicles
entering and exiting the blind spot zones
may not be detected.
6
C-MAX (CB7) Vehicles Built From: 10-09-2012, Vehicles Built Up To: 31-12-2014, CG3558en enGBR, Edition date: 03/2014, Second Printing
To Next Page
Loading...
Need help?
General
