Note: The gearshift lever can only be
moved into R (Reverse) by moving it from
left of 3 (Third) and 4 (Fourth) before
shifting into R (Reverse). This is a lockout
feature that protects the transmission from
accidentally being shifted into R (Reverse)
from 5 (Fifth).
Hold the clutch pedal down and move the
gearshift lever into the neutral position.
Shift into R (Reverse).
If R (Reverse) is not fully engaged, press
the clutch pedal down and return the
gearshift to the neutral position. Release
the clutch pedal for a moment, then press
it down and shift to R (Reverse) again.
Parking Your Vehicle
WARNING
Do not park your vehicle in Neutral,
it may move unexpectedly and injure
someone. Use 1 (First) gear and set
the parking brake fully.
To park your vehicle:
1. Apply the brake and shift into the
neutral position.
2. Fully apply the parking brake, hold the
clutch pedal down, then shift into 1
(First).
3. Turn the ignition off.
AUTOMATIC TRANSMISSION
PowerShift Automatic
Transmission
WARNINGS
Always set the parking brake fully
and make sure the gearshift is
latched in P (Park). Turn the ignition
to the off position and remove the key
whenever you leave your vehicle.
WARNINGS
Do not apply the brake pedal and
accelerator pedal simultaneously.
Applying both pedals simultaneously
for more than three seconds will limit
engine rpm, which may result in difficulty
maintaining speed in traffic and could lead
to serious injury.
Note: Some sound and shift characteristics
are unique to the transmission in your
vehicle. These operations are normal and
do not affect the durability of the
transmission.
Note: Do not use the accelerator to hold
your vehicle at a standstill while waiting on
a hill. This will overheat the transmission.
Putting your vehicle in gear:
1. Fully press down the brake pedal.
2. Press and hold the button on the front
of the gearshift lever.
3. Move the gearshift lever into the
desired gear.
4. Release the button and your
transmission will remain in the selected
gear.
To Next Page
Loading...
Need help?
General
