Ford Explorer 2005 - Daytime Running Lamps (DRL) (if Equipped); High Beams; Flash to Pass

Daytime running lamps (DRL) (if equipped)
To activate DRL:
• the ignition must be in the ON position and
• the headlamp control is in the
or position
• the parking brake must be disengaged.
Always remember to turn on your headlamps at dusk or during
inclement weather. The Daytime Running Light (DRL) System
does not activate your tail lamps and generally may not provide
adequate lighting during these conditions. Failure to activate your
headlamps under these conditions may result in a collision.
High beams
Push the lever toward the
instrument panel to activate. Pull
the lever towards you to deactivate.
Flash to pass
Pull the lever toward you to
activate. Release the lever to
deactivate.
INT2
OFF
O
F
F
INT1
INT2
OFF
O
F
F
INT1
2005 Explorer (exp)
Owners Guide (post-2002-fmt)
USA (fus)
Lights
55