System Settings
The system has one standard feature setting and one optional setting
menu available. To view or adjust the settings, refer to the Information
Displays chapter. The last-known selection for each of these settings is
stored by the system. You do not need to readjust your settings each
time you turn on the system.
Mode: This setting allows you to enable one of the system features.
Alert only – Provides a steering
wheel vibration when the system
detects an unintended lane
departure.
Aid only – Provides an assistance
steering torque input toward the
lane center when the system
detects an unintended lane
departure.
Alert + Aid – Provides an assistance
steering torque input toward the
lane center. If your vehicle
continues drifting out of the lane,
the system provides a steering
wheel vibration.
A. Alert
B. Aid
Note: The alert and aid diagrams are meant to illustrate general zone
coverage. They are not intended to provide the exact zone parameters.
A
B
A
B
Driving Aids 255
2014 Explorer (exp)
Owners Guide gf, 3rd Printing, September 2013
USA (fus)
To Next Page
Loading...
