• Standard safety belt
• Inflatable safety belt
9. Attach the tether strap (if the child seat is equipped). See Using
Tether Straps later in this chapter.
10.
Before placing the child in the
seat, forcibly move the seat forward
and back to make sure the seat is
securely held in place. To check
this, grab the seat at the belt path
and attempt to move it side to
side and forward and back. There
should be no more than 1 inch
(2.5 centimeters) of movement for
proper installation.
Ford recommends checking with a NHTSA Certified Child Passenger
Safety Technician to make certain the child restraint is properly installed.
In Canada, check with your local St. John Ambulance office for referral
to a Child Passenger Safety Technician.
Child Safety 31
2014 Explorer (exp)
Owners Guide gf, 3rd Printing, September 2013
USA (fus)
To Next Page
Loading...
