previously programmed set speed.
To set a lower set speed
• Press and hold COAST. Release
the switch when the desired
vehicle speed is reached, or
• Press and release COAST. Each
press will decrease the set
speed by 1.6 km/h (1 mph) or
• Depress the brake pedal. When
the desired vehicle speed is
reached press SET ACCEL.
To return to a set speed
• Press RES. For RES to operate,
the vehicle speed must be faster
than 48 km/h (30 mph).
To disengage speed control
• Depress the brake pedal.
Disengaging the speed control will
not erase the previously
programmed set speed.
RES
SET
ACCEL
COAST
RES
SET
ACCEL
COAST
com_slow_down.01
com_resume_feature.01
com_disengage_speed_control.01
f12_wiper_washer
Controls and features
35
To Next Page
Loading...
