95
Seating and safety restraints
Beltminder
When the vehicle’s speed exceeds
20 km/h, the Beltminder warning
light will illuminate and a chime will
sound if the driver’s safety belt is
unbuckled. The chime will stop
after 10 minutes. The warning light
will not go out until the driver has
fastened his/her safety belt.
The Beltminder remains in
stand - by mode after the
driver has fastened his/her safety
belt. It will be reactivated if the
driver unbuckles his/her safety
belt.
Never sit on top of a
buckled safety belt to avoid
the Beltminder function. The
restraint system can only work
properly if passengers have
buckled up their safety belts.
The driver must buckle and
unbuckle the safety belt within
3 seconds with the ignition
switched on.
Deactivating the Betminder for
one ignition cycle
To Next Page
Loading...
